Shenzhen XH Technology Co., Ltd.
Shenzhen XH Technology Co., Ltd.
Add to Cart
Fluorescent Green 3mm Coloured Acrylic Sheet Large Roofing Cast Board
Coloured Acrylic Sheet fluorescent green 3mm thin large roofing lucite cast board cut to size
1. Acrylic fluorescent sheet
Acrylic fluorescent plates are mainly used in the outer layer of LED panels, and many businesses use acrylic fluorescent plates to make many beautiful handicrafts, and the products themselves have high light transmittance.
Acrylic is the best new material to manufacture sanitary ware after ceramics. Compared with traditional ceramic materials, in addition to its unparalleled high brightness, acrylic has the following advantages: good toughness, not easy to be damaged; strong repairability, as long as you use soft foam to dip some toothpaste, you can wipe the sanitary ware new; soft texture, winter There is no cold and biting feeling; the colors are bright, which can meet the individual pursuit of different tastes. Using acrylic to make basins, bathtubs and toilets is not only beautiful in style, durable, but also environmentally friendly. Its radiation is almost the same as that of the human body's own bones. Acrylic sanitary ware first appeared in the United States and has occupied more than 70% of the entire international market.
2. Parameter
| PROPERTIES | VALUES | RULES |
| Density | 1.19 g/cm3 | ISO 1183-1:2012 Method A |
| Rockwell Hardness | 112L | ISO 2039-2:1999 |
| Tensile Modulus | 3150MPa | EN ISO 527:2012 |
| Tensile Strength | 80.0MPa | EN ISO 527:2012 |
| Tensile Strain at Break | 3.2% | EN ISO 527-1:2012 |
| Water Absorption | 0.20% | ISO 62:2008 Method 1 |
| Total Luminous Transmittance | 93.4% | ISO 13468-1:1996 |
| Vicat Softening Temperature | 105℃ | ISO 306:2013 Method B50 |
| Light Ageing Test- UV Exposure | Grey scale: 5 | ISO 4892-3:2016 Cycle 1 |
| Mean Coefficient of Linear Thermal Expansion | 72×10-6 K-1 | ISO 11359-1:2014 |
| Compressive Stress at Yield | 129MPa | EN ISO 604:2003 |
| Flexural Strength | 120MPa | ISO 178:2013 |
| Compressive Yield Strength | 111MPa | ASTM D695-15 |
| Compressive Modulus | 3450MPa | ASTM D695-15 |
| Shear Strength | 59.7MPa | ASTM D732-17 |
| Deflection Temperature under Load | 100.2℃ | ASTM D648-18 Method B |
| Modulus Elasticity | 2810MPa | ASTM D695-15 |
3. The process of making acrylic sheet
Cutting: Use the cutting machine to continue cutting the acrylic sheet. It is necessary to clarify the size of the acrylic product and be able to cut the material correctly, so as to avoid the waste of materials.
Statue: After the material cutting is realized, according to the shape of the acrylic product, it is necessary to continue the preliminary statue of the acrylic sheet, and the statue will be in the opposite shape.
Trimming: After cutting or sculpting, the edge of the acrylic sheet is relatively rough, so continue the acrylic trimming solution, which should be used in a trimming machine.
Punching: A certain process is based on the needs of acrylic products. Some acrylic products have small round holes. This step requires a punching process.
Polishing: After cutting, statue and punching, the edges are rough and easy to scratch the hand. Therefore, the polishing process is adopted. Polishing is also divided into mound polishing, cloth wheel polishing and fire polishing. It is necessary to choose the opposite polishing according to the product. form.
4. Acrylic sheet Application
7. Package and shipping
7.1. One piece of acrylic sheet package: double-sided covered with kraft paper or PE film, the cover film does not have any LOGO of our company.
7.2. Tray package: the total weight of each pallet is about 2 tons, the bottom is wooden pallet or iron pallet, and the surrounding is packed with corrugated paper.
7.3. The packaging method of the whole container: 20-23 tons (about 3000 pieces) 20-foot container, 10-12 pallets.